mapping ko4'd agu

[DMcK]

What bhp would i see from a K03, catback and a remap?

[Hulmie]

probs around the 180bhp mark depending if the actuator is strong. Would recommend fitting a Forge 007p recirc valve and maybe get a pipercross panel filter or CAI to get more air to the turbo.

[Hulmie]

niki - in the dry its a wepon    

wrong siide on 140  

naughty

[DMcK]

Yeah i will get a forge DV. I've recently just put in a pipercross panel filter. 180? That it. Might have to try get my hands on a K03s when i have money. 

[Hulmie]

without the filter and recirc valve.

I was getting 198bhp with 3" downpipe n de-cat, milltek back anni style system, pipercross filter, forge TIP and forge 007p with a r-tech remap.

[RTechUK]

Just found out the BAM will also crack 300bhp    

306bhp @5200rpm @ 1.29bar with less than 80% N75 duty on a stock actuator with 4 turns of added pre load.

EGTs 820 @ 6800rpm on the dyno, just need to do some road tesing to fully load the engine and injectors..

[barrym381]

Just found out the BAM will also crack 300bhp    

306bhp @5200rpm @ 1.29bar with less than 80% N75 duty on a stock actuator with 4 turns of added pre load.

EGTs 820 @ 6800rpm on the dyno, just need to do some road tesing to fully load the engine and injectors..

is this with similar bits to toby

[RTechUK]

Just found out the BAM will also crack 300bhp    

306bhp @5200rpm @ 1.29bar with less than 80% N75 duty on a stock actuator with 4 turns of added pre load.

EGTs 820 @ 6800rpm on the dyno, just need to do some road tesing to fully load the engine and injectors..

is this with similar bits to toby

Apart from the large port head and this is running me7.5 ecu which is a little be harder to run a good sum of timing advance

[Hulmie]

turning into a K04 wizard now nick.

[Toby]

hawt stuff! whens F17 BAD geting booked in for a REAL MANS REMAP!